Agilent E4438C – Agilent E4438C ESG Vector Signal Generator
Specifications
| Frequency Range |  1 GHz – 6 GHz |
|
| Frequency Resolution | 0.01 Hz | |
| Output Accuracy | +/-0.5 | |
| Output Range | -136 dBm – 11 dBm | |
| Output Resolution | 0.02 dB | |
| SSB Phase Noise Range | <-118 dBc/Hz |
Option Configurations
| 001 | Internal baseband generator (8 Msamples memory) |
|
| 002 | Internal baseband generator (32 Msamples memory) | |
| 003 | Enables ESG digital output connectivity with N5102A | |
| 004 | Enables ESG digital input connectivity with N5102A | |
| 005 | 6 Gbyte hard drive | |
| 0BV | Service documentation, component level | |
| 0BW | Service documentation, assembly level | |
| 1CM | Rack mount without handle | |
| 1CN | Handle kit | |
| 1CP | Rackmount kit with front handles | |
| 1E5 | High-stability time-base | |
| 1EM | Moves all front panel connectors to rear panel | |
| 221 | Waveform 5-pack1 | |
| 222 | Waveform 5-pack2 | |
| 223 | Waveform 5-pack3 | |
| 224 | Waveform 5-pack4 | |
| 225 | Waveform 5-pack5 | |
| 226 | Waveform 5-pack6 | |
| 227 | Waveform 5-pack7 | |
| 228 | Waveform 5-pack8 | |
| 229 | Waveform 5-pack9 | |
| 300 | GSM/EDGE Base-station Loop-back test capability | |
| 400 | 3GPP WCDMA (FDD) personalities | |
| 401 | cdma2000 and IS-95-A personalities | |
| 402 | TDMA personalities (GSM, EDGE, NADC, PDC, PHS, DECT, TETRA) |
| 403 | Calibrated noise personalities |
|
| 404 | 1XEV-DO signal studio software | |
| 406 | Bluetooth signal studio software | |
| 407 | Signal Studio for S-DMB | |
| 408 | Signal studio for enhanced multitone | |
| 409 | GPS personality | |
| 411 | TD-SCDMA (TSM) signal studio software | |
| 414 | Signal studio for 1xEV-DV and cdma 2000 | |
| 417 | Signal studio for 802.11 WLAN | |
| 418 | Signal studio for HSDPA over W-CDMA | |
| 419 | Signal Studio for 3GPP W-CDMA HSPA | |
| 420 | Signal studio for pulse building | |
| 421 | Signal studio for noise power ratio (NPR) | |
| 501 | 250kHz to 1 GHz | |
| 502 | 250kHz to 2 GHz | |
| 503 | 250kHz to 3 GHz | |
| 504 | 250kHz to 4 GHz | |
| 506 | 250kHz to 6 GHz | |
| 601 | Internal baseband generator, 8 Msa memory with digital bus capability | |
| 602 | Internal baseband generator, 64 Msa memory with digital bus capability | |
| 701 | Standard Chassis | |
| 702 | IEM Chassis | |
| 703 | UN7 Chassis | |
| 704 | UNB Chassis | |
| 705 | Standard and 005 chassis | |
| 706 | 1EM and 005 chassis | |
| 707 | UN7 and 005 chassis | |
| 708 | UNB and 005 chassis | |
| 709 | UN7 and 300 Chassis | |
| 710 | UN7 and 300 and 005 Chassis | |
| 711 | UN7 and UNB Chassis | |
| 712 | UN7 and UNB and 005 Chassis | |
| 713 | 506 and UN7 Chassis | |
| 714 | 506 and UN7 and 005 Chassis | |
| 715 | 506 Chassis | |
| 716 | 506 and 005 Chassis | |
| 717 | 1EM and UN7 and 300 Chassis | |
| 718 | 1EM and UN7 and 300 and 005 Chassis | |
| 719 | 1EM and UN7 Chassis | |
| 720 | 1EM and UN7 and 005 Chassis | |
| 730 | MATERIAL FOR UNM + HCC | |
| 731 | MATERIAL FOR 1EM + HCC | |
| 791 | Implied by E4438C-OC-SOFTWR | |
| 792 | Implied by E4438C-300 | |
| AB0 | Taiwan – Chinese localization | |
| AB1 | Korea – Korean localization | |
| AB2 | China – Chinese localization | |
| ABA | United States – English documentation set | |
| ABF | France – French localization | |
| ABJ | Japan – Japanese localization | |
| D01 | Hardware option for E4438C | |
| D02 | Hardware option for E4438C | |
| D03 | Hardware option for E4438C | |
| D04 | Hardware option for E4438C | |
| D05 | Hardware option for E4438C |
| D06 | Hardware option for E4438C |
|
| D07 | Hardware option for E4438C; 503,1EM,UNB,UNP,1E5 | |
| D08 | Hardware option for E4438C; 503,1EM,UNB,UNJ,1E5 | |
| D09 | Hardware option for E4438C; 504,UNM,UNN,UNP,1E5 | |
| D10 | Hardware option for E4438C; 504,UNM,UNN,UNJ,1E5 | |
| D11 | Hardware option for E4438C; 504,UNM,UNB,UNP,1E5 | |
| D12 | Hardware option for E4438C; 504,UNM,UNB,UNJ,1E5 | |
| D13 | Hardware option for E4438C (504/1EM/UNN/UNP/1E5) | |
| D14 | Hardware option for E4438C (504/1EM/UNN/UNJ/1E5) | |
| D15 | Hardware option for E4438C (504/1EM/UNB/UNP/1E5) | |
| D16 | Hardware option for E4438C (504/1EM/UNB/UNJ/1E5) | |
| D17 | Hardware option for E4438C (506/UNM/UNB/UNJ/1E5) | |
| D18 | Hardware option for E4438C (506/1EM/UNB/UNJ/1E5) | |
| H08 | enchancement to E4438C-408 | |
| H13 | Enables option 413 (Pre-release signal studio for WiMAX personality) for the E4438C | |
| H14 | Improved Phase Noise performance for a specific frequency | |
| H16 | Warranted +16dBm maximum leveled RF output over 250MHz to 3GHz with option 506 | |
| H20 | Signal studio for pulse building for the E8267C opt. 420 to operate in the E4438C | |
| H25 | Extends the lower limit to Swept-Sine frequency to 25 MHz for LF Out | |
| H3V | Increases the I/Q output voltage from 1.5V pk-pk to 3.0V pk-pk for the E4438C | |
| H58 | Provide ACLR <= 58db for multi-carrier WCDMA | |
| HA3 | Tested 100 Hz phase noise at 6 GHz and 100 Hz spurs at 5.18 GHz | |
| HA6 | Provide ACLR less than= – 60dbc for muti-carrier WCDMA | |
| HA7 | Specify Non-harmonics for frequency 136 MHz to 174 MHz to be less than -75 dBc | |
| HBC | Provides frequency from 4GHz up to 6GHz In and Out on the rear panel | |
| HCC | Provides 250MHz to 4GHz in & out on the rear panel | |
| HDS | Provides synchronized DSIM device clock | |
| HEC | Provides external BBG clock input on rear panel | |
| HF8 | Extends the Frequency to 6.5 GHz for the E4438C with unspecified performance | |
| HM3 | 2nd BaseBand Generator, 8 MSA Memory with I/Q summing ratio and freq offset. | |
| HM4 | 2nd BaseBand Generator, 64 MSA Memory with I/Q summing ratio and freq offset. | |
| HP3 | Second internal baseband generator for polar modulation with synchronization between two baseband generators, 8 Msa memory | |
| HP4 | Second internal baseband generator for polar modulation with synchronization between two baseband generators, 64 Msa memory | |
| LIC | License CD-ROM | |
| QUO | N7617B-1FP 802.11 WLAN – connect to E4438C signal generator, fixed, perpetual license | |
| RMKT | Agilent refurbished product | |
| SK1 | SW KIT- SW CD | |
| SK2 | SW KIT- SW CD, Pre-Installed SW LIC Notice | |
| SP1 | Provides jitter injection for signal studio software | |
| SP2 | Provides dynamic sequencing capability in the E4438C | |
| UK6 | Commercial calibration certificate with test data | |
| UN7 | Internal Bit Error Rate analyzer | |
| UNB | High output power with mechanical attenuator | |
| UNJ | Enhanced phase noise performance | |
| UNM | Standard front and rear panel connector configuration | |
| UNN | Standard output power with electronic attenuator |
